How to select a product
Makizume Block
The Makizume Block can treat nails with surface width
between 16mm to 26.5mm
Measure the size of the nail surface Use the attached measurer to measure the width of the nail surface.
Nail surface width
Nail corrected with Robo
Set the end of
the measure sticker
accurately to the side of your nail
Choose the sizeMatch the measurement results with below size chart to determine the size.
| S(Initial length 14mm) | M(Initial length 17.5mm) | L(Initial length 21mm) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| The width of the nail surface(mm) | ||||||||||||||
| 16 | 17 | 18 | 19 | 19.5 | 19.5 | 20 | 21 | 22 | 23 | 23 | 24 | 25 | 26 | 26.5 |
| The extended length of the spring(mm) | ||||||||||||||
| 2 | 3 | 4 | 5 | 5.5 | 2 | 2.5 | 3.5 | 4.5 | 5.5 | 2 | 3 | 4 | 5 | 5.5 |
* Choose the size 2-5.5mm shorter than your nail width,
as the Block needs to be extended when in use.
* In the service pack, one set of each size is included,
thus you can find your best fit size by trying on.
Choose the tension typeMatch the measurement results with below size chart to determine the size.
There are four types of tension for the Makizume Block.
We provide “hard” type for the service pack with the Robo.
Try it first, please choose “super hard” and “ultra hard” when you want a stronger one.
Please choose “normal” when you want a weaker one.
* The thickness of the nail mainly effects which to choose.
If you choose one thatʼs too strong for your nail thickness, it may cause nail crack.
Generally, itʼs safer to start the treatment from weaker one
- Normal
- Hard
- Super Hard
- Ultra Hard
Please check the size chart below for details on the size and the tension.
Choose the perfect size & tension!Size Chart
Please choose the size and type that best fits your nail
Force by type(g)*spring constant = pulling power when stretched for 1mm (correction power)
| The width of the nail surface (mm) |
NormalSpring constant60g | HardSpring constant80g | Super HardSpring constant100g | Ultra HardSpring constant130g | |
|---|---|---|---|---|---|
| 16 | SIntial length14mm |
120 | 160 | 200 | 260 |
| 17 | 180 | 240 | 300 | 390 | |
| 18 | 240 | 320 | 400 | 520 | |
| 19 | 300 | 400 | 500 | 650 | |
| 19.5 | 330 | 440 | 550 | 715 | |
| 19.5 | MIntial length17.5mm |
120 | 160 | 200 | 260 |
| 20 | 150 | 200 | 250 | 325 | |
| 21 | 210 | 280 | 350 | 455 | |
| 22 | 270 | 360 | 450 | 585 | |
| 23 | 330 | 440 | 550 | 715 | |
| 23 | LIntial length21mm |
120 | 160 | 200 | 260 |
| 24 | 180 | 240 | 300 | 390 | |
| 25 | 240 | 320 | 400 | 520 | |
| 26 | 300 | 400 | 500 | 650 | |
| 26.5 | 330 | 440 | 550 | 715 | |
Trial set
How to see the chart
Example: If the width of your nail is 18mm…
・The size is “S”
・The Block will extend for 4mm (14mm - 18mm)
・strength can be determined by
spring constant(g)× extended length(mm)
Normal : 60g × 4mm = 240g
Hard : 80g × 4mm = 320g
